Cellink NEO Battery Pack For Dash Cams

The Cellink NEO is an all new dash cam battery pack with an integrated smartphone app that lets you quickly see the battery percentage as well as power draw. There's no need to look at the battery once it's installed making it a lot simpler to use! Powered by LiFePO4 ( Lithium Iron Phosphate ) this power pack is designed with dash cams in mind. Able to provide up to 32 hours of continuous power to your camera with a quick 45 minute charge this battery is something you can rely on.

The NEO features Bluetooth technology, when paired with the app that's available on iOS App Stores as well as the Google Play Store it's super easy to see the read outs. The App itself gives out plenty of useful information. Overall Battery percentage, whether the unit is charging or discharging, how long it can power the camera for as well as how long it'll take to fully charge. With these useful new features and extended battery times, it makes it easy to recommend the NEO as the ultimate solution for powering your Dash cam.

The Cellink is built with the safest battery technology using LiFePO4 (lLithium Iron Phosphate) which will keep your dash cam running for long hours in parking mode with just 40 minutes of charging. To power dash cams for parking mode is a challenging problem where mobile power is needed. Even though car battery has much higher capacity than Cellink battery, it is not designed for routine deep discharge cycles while car is parked hence its performance may deteriorate and life is shortened prematurely over time. Cellink NEO comes with Bluetooth built-in and compatible with iOS and Android smartphone so that you can check the charging and usage time easily. Supply up to 32 hours of power during parking mode with only 40 minutes of charging time. NEO is definitely faster and smarter! The system works by charging a high quality lithium-ion battery when your car is running. When your car is turned off, the charged battery is then used to provide continuous 12V power to your dash camera without the need to drain any power from your car's battery. This process is very effective in minimising the risk of battery discharge, low voltage warnings and flat batteries.

You need to drive for 40mins - 80mins per day at least in order to charge the Cellink-Neo to it's full capacity. Shorter driving times will result in fewer hours of parking mode. Charge time is also affected by the charge mode setting (9A/5A).

Cellink NEO Product Video

Key Features

• Fully independent power source for the Parking Recording, it does not use your car's battery at all. No flat battery due to the dash cam usage anymore!

• Large 76.8 Wh capacity is capable of covering up to 45 hours of Parking Recording (single-channel dash cam, when fully charged).

• Long cycle life (up to 3,000 cycles).

• Super fast charging mode, fully charged within a 40-minute drive (requires hardwiring).

• High quality LiFePO4 lithium-iron phosphate battery means the system can reach temperatures of up to 70oC before the internal sensor automatically shuts the system off safely (High temperature Cuts-Off).

• Protection Circuit Module (PCM) and Short Circuit Protection.

• Do not want it hardwired Easy DIY installation via cigarette lighter output is available!

• Does not interfere with the car's sensitive electronics or trigger error codes.

• Compact enough to be hidden under a seat of nearly any car.

• Stylish and robust aluminum casing.

Model Code CELLINK-NEO Battery Capacity 76.8 Wh / ~6,000mAh 12.8V Input Charging Power 12Volts - 17Volts ~ 6.5A MAX (Through Cigarette Lighter)
3.5A MAX (Through Fusebox) Charging Ampere Options 5 (low) or 9 (high) Ampere (A) (switch selectable) Charging Time 1hour 20min (5A) / 40min (9A) Usage time (discharging) DR750S-1CH = ~33Hrs / DR750S-2CH = ~18Hrs Battery Type Lithium-iron (LiFePo4) Samsung LED Built-in LED (Indicates Status / Charging or Full) BLUETOOTH Built-In + Free iOS &; Android Application Dimensions 150mm x 170mm x 38mm Weight 1.3Kg Operating Temperature -10 ~ 70'C (Celsius)