EasyFil ABS 2.85mm Glow in the Dark Green 750 gram

EasyFil(TM), ABS - Glow in the Dark

EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament.

EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments.

Unique features

• Superb process stability and limited warping
• Significant higher impact resistance than average ABS
• Very strong and durable
• Light-weight
• Viscat softening temperature of 103o C
• Wide variety of vivid opaque colors
• Engineered to be compliant to FDA food and drink contact articles

General printing guidelines *

Nozzle size: 0.15mm

Layer height: 0.1mm

Flow rate: 104%

Print temp: 220 - 270o C

Print speed: Medium

Retraction: Yes 5mm

Heat bed: 90 - 110o C

Fan speed: 0-25%

Experience level: Intermediate

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Abrasiveness

Please be aware that Glow in the Dark filaments contain a relatively high concentration of extremely hard phosphorous particles, which have an abrasive nature. In general these phosphorous particles will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use nozzles from stainless steel or other hardened alloys.

Filament length

: 1.03 g/cc

50 gr coil

0.75 Kg spool

2.3 Kg spool

 **O 1.75mm**

20.2m

303m

928m

 **O 2.85mm**

7.6m

114m

350m