EasyFil PLA 2.85mm Magenta 750 gram

EasyFil(TM), PLA

EasyFil PLA is a high-end "easy to use" impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament.

Unique features

• Very easy to print
  • oWarp-free printing and no deformation after cooling
  • oImproved flowing behaviour and inter-layer adhesion
  • oGood first layer adhesion to several (un)heated print surfaces
• Slightly softer than standard PLA resulting in improved strength and impact resistance
• Almost odourless processing/printing
• Biodegradable
• Wide variety of vivid opaque colors
• Engineered to be compliant to FDA food and drink contact articles

General printing guidelines *

Nozzle size: 0.15mm

Layer height: 0.1mm

Flow rate: 100%

Print temp: 180 - 220o C

Print speed: Medium

Retraction: Yes - 5mm

Heat bed: 0 - 60o C

Fan speed: 50-100%

Experience level: Beginner

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

: 1.24 g/cc

50 gr coil

0.75 Kg spool

2.3 Kg spool

4.5 Kg spool

8 Kg spool

O 1.75mm

16.8m

251m

771m

1509m

2682m

O 2.85mm

6.3m

95m

291m

569m

1011m