Fenix PD32 Compact Pocket LED Flashlight 900 Lumen HI White XP-L Cree

The upgraded PD32 LED flashlight from Fenix now lights your way with 900 max lumens from one 18650 rechargeable Li-ion battery or two disposable CR123A batteries. Choose between 5 brightness levels, for a maximum beam distance of 240 meters, as well as strobe and S.O.S. modes. Tap and hold the tactical tail switch for a fast momentary on and the side switch to access the different modes. The PD32 LED flashlight is perfect for hiking, camping and outdoor activities and is powerful enough for law enforcement and search/rescue.
;

Features:

• Uses Cree XP-L HI white LED with a lifespan of 50,000 hours
• Digitally regulated output maintains constant brightness
• Compatible with AER-01 and AER-02 remote pressure switch
• Low voltage reminder indicates when battery replacement is needed
• Reverse polarity protection, to protect from improper battery installation
• Over-heat protection to avoid high temperature of the surface
• Anti-roll and anti-slip body design, capable of tail standing
• Tactical tail switch, momentary-on function
• Side switch for light-dimmer and mode shifting
• Made of durable aircraft-grade aluminum
• Premium type hard-anodized anti-abrasive finish
• Toughened ultra-clear glass lens with anti-reflective coating

Size:
Length: 5.1 (129.5mm)
Body: 0.9 (22.6mm)
Head: 0.9 (24mm)
Weight: 2.7 oz. (77g) excluding battery

Batteries: One 18650 Li-ion battery or two CR123A batteries
(Batteries NOT included) ;Check our other listings for a wide range of compatible batteries &; chargers. Assemble your own rechargeable kit to suit your needs or in many ;cases we already have a pre bundled flashlight w/ ;charger &; ;batteries combo set available at discounted rates.

Included: Holster, body clip, lanyard, spare O-ring, spare rubber switch boot

Operation Instruction

• ON/OFF
• Tap the tail switch to momentarily turn on the light, release it the light goes out.
• Fully press the tail switch to turn ON/OFF the light.
• Output Selection
• With the light on, single-click the side switch to cycle through TurboLowMidHighEco.
• Strobe and SOS
• With the light on, press and hold the side switch for 0.5 seconds to enter into Strobe mode.
• Under Strobe mode, single-click the side switch to cycle through StrobeSOS.
• Then press and hold the side switch for 0.5 seconds to turn back to General mode.
• Intelligent Memory Circuit
• The flashlight memorizes the last-used brightness level in the General mode, but not Strobe and SOS. The next time you turn on the flashlight, it will activate the last brightness level you selected.

Over-heat Protection
The flashlight will accumulate a lot of heat when it is working at Turbo and High brightness level. When it works at Turbo for 3 minutes or at High for 30 minutes, the flashlight will automatically downshift to lower output to prevent the light from overheating. If the Turbo or High output is needed, please reset it again. But the flashlight could be damaged or the normal service life would be shortened because of continuous use like this.

Low-voltage Warning Function
If low voltage is detected, the flashlight is programmed to downshift to a lower brightness level until to Eco brightness level. When this happens at Eco output mode, the flashlight blinks three times every five minutes to remind you to replace the battery. To ensure normal use, the flashlight will not turn off automatically and will work until the battery runs out completely

;

*** Genuine Australian Authorised Agent - Australian Stock - Australian Fenix Warranty
Please beware of overseas or non authorised Australia Fenix sellers. The Fenix Australia distributor is working extremely hard towards stopping rogue sellers. For you peace of mind purchasing from an authorised Australian agent ensures your product is backed by full Australian warranty and items that use 240v have been tested &; approved to meet current Australian safety standards where overseas versions &; those sold by non agents are not.

;