Kogel PF30-24-GXP 46 x 68mm Low Insert Road Bottom Bracket

Kogel Hybrid bearings use premium grade Silicon Nitride (Si3n4) Bearings and premium hardened steel bearing races which are mirror polished to perfection. The result A long lasting, smooth bearing which provides less resistance and is less prone to failures. These bearings are rated to the Grade 3 / ABEC 5 level - built to spin with minimal friction.

This bottom bracket is Kogel's PF30-24, but with a shallower insert depth. The original PF30-24 was designed to make a rock-solid connection between the frame and crank set. Due to the almost 1 inch deep contact area with the frame, it covers the openings inside the BB shell on some frames. Typically, the chain stay hole on steel and titanium frames. A real bummer if you're trying to route a Di2 wire internally. For these frames Kogel have designed the PF30-24L, same thing minus the insert guide and a few mm of contact area.

This bottom bracket fits all 24mm crank spindles and comes with a GXP reducer in the box for SRAM. Choose road bearings for road bikes, cross bearings for mountain bikes and cyclocross. Low Insert casing allows for easier internal cable routing
Fits all 24mm crank spindles
Fitment: 46mm diameter
Shell Width: 68mm
Spindle: 24mm
Compatibility: Shimano Hollowtech II, SRAM GXP, and any most 24mm spindle systems
System includes GXP Reducer
Road Seals (Blue)