Milwaukee M18 Fuel 1/2inch High Torque Impact Wrench with Pin Detent Kit M18FHIWP12502C

The M18 FUEL High Torque Impact Wrench with Pin Detent provides a full corded replacement delivering 1016Nm of fastening torque and 1491Nm of nut-busting torque. The industry's most compact cordless High Torque Impact wrench at 205mm in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL with Bolt Removal mode gives users the most control over their fasteners. Bolt Removal mode gives the user more control when removing fasteners by slowing to 750rpm once the fastener has been busted loose.

This tool includes a Pin Detent anvil which provides superior socket retention. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials. REDLINK PLUS Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity.

The Milwaukee REDLITHIUM Battery Pack is the most durable pack on the market delivering more run-time, power and longer battery life. POWERSTATE brushless motor delivers up to 1016Nm of fastening torque and 1491Nm of nut-busting torque Compact cordless high torque impact wrench at 205mm 4-mode DRIVE CONTROL with bolt removal mode, allowing for ultimate control 0 to 950/1500/1800-750RPM and 0 to 1150/2100/2400/2400IPM Bolt removal mode provides maximum nut-busting torque to break fasteners free, then slowing to 750rpm for more control when removing fasteners

Features a pin detent design for maximum socket retention Premium rubber overmold withstands corrosive materials and provides increased comfort when in use Reduces user fatigue at only 2.5kg LED light to illuminate the work area.

Milwaukee M18FHIWP12-0 18V Li-Ion Cordless Fuel Gen 2 1/2" High Torque Impact Wrench with Pin Detent - Skin Only - M18FHIWP12-0

Features:

• 4mm shorter motor length
• Back cap design saved 9mm in length
• Optimised air flow for longer run time
• High grade magnets
• Upgraded circuit board for improved performance and reduced heat
• Upgraded terminal block- reduces battery vibration between tool &; batterypack
• 4-mode Drive Control with Bolt Removal Mode
• More mass in hammer provides more torque in Gen 2
• New premium alloy anvil material and updated design to handle increased torque.
• New LED location to the foot of the tool for improved illumination of the work surface
• LED light is brighter than Gen 1
• 4-Mode Drive Control with Bolt Removal Mode

Specifications:

• Voltage: 18V
• Fastening Torque: 1016Nm
• Nut Busting Torque: 1491Nm
• RPM: 0-1800
• IPM: 0-2400
• Weight: 3kg

Warranty:

• 5 Years Warranty Covered By Milwaukee Australia

MILWAUKEE M18B5 18V 5.0AH LI-ION RED LITHIUM BATTERY - M18B5

The new M18B5 outperforms the M18BX by up to 50% and outperforms the M18B4 by up to 35%, the new M18B5 battery will fit all Milwaukee M18 cordless tools

Features:

• Milwaukee's patented REDLITHIUM technology
• OVERLOAD PROTECTION to prevent battery abuse
• TEMPERATURE MANAGEMENT SYSTEM to keep battery at ideal temperature
• INDIVIDUAL CELL MONITORING for optimum charge and discharge for maximum battery life
• DISCHARGE PROTECTION prevents cell damage from over discharge
• 5.0Ah extended capacity battery pack

Specifications:

• Battery Capacity: 5.0Ah
• 2% more Rechargers
• 20% more Power
• 2 x more Run-time

Milwaukee M12-18C 12V - 18V Multi Voltage Charger - M12-18C

Features:

• Recharges all M18, M14 and M12 REDLITHIUM-ION battery packs
• Recharges in sequence - first in, first to charge - resulting in less time needed to manage charging cycles
• REDLITHIUM-ION 3.0 Ah battery packs recharge in 60 min or less
• REDLITHIUM-ION 1.5 Ah battery packs recharge in 30 min or less

Specifications:

• Voltage: 12V, 14V, 18V
• Charge time:
• 1.5Ah: 30 minutes
• 3.0Ah: 60 minutes

Milwaukee MILCAS14 18V Fuel Single Carry Case to suit M18CHIWF - MILCAS14

Important note: This case is for the M18CHIWF skin and kit only. Case may differ slightly from image.

Features:

• Heavy Duty blow molded polyethylene construction carrying case
• Fits : 1 x tools, 2 x batteries, 1 x charger

Kit Includes:

The M18 FUEL High Torque Impact Wrench with Pin Detent provides a full corded replacement delivering 1016Nm of fastening torque and 1491Nm of nut-busting torque. The industry's most compact cordless High Torque Impact wrench at 205mm in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL with Bolt Removal mode gives users the most control over their fasteners. Bolt Removal mode gives the user more control when removing fasteners by slowing to 750rpm once the fastener has been busted loose. This tool includes a Pin Detent anvil which provides superior socket retention. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.

• Compact cordless high torque impact wrench at 205mm
• 4-mode DRIVE CONTROL with bolt removal mode, allowing for ultimate control
• Bolt removal mode provides maximum nut-busting torque to break fasteners free, then slowing to 750rpm for more control when removing fasteners
• Features a pin detent design for maximum socket retention
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• Reduces user fatigue at only 2.5kg
• LED light to illuminate the work area

*Battery and charger not included

The M18 5.0AH REDLITHIUM-ION BATTERY features superior pack construction, electronics, and performance to deliver more work per charge and more work over the life of the pack than any battery on the market. M18 5.0AH REDLITHIUM-ION BATTERY features an advanced design, protecting the pack against harsh jobsite environments. This protection routes water away from the electronics and out of the battery pack, extends run-time and life by minimizing heat, and prevents pack failures from vibration or drops.

This unique to Milwaukee design also allows the battery to operate in extreme cold weather conditions (below OoF/-18oC). Managed by Milwaukee's exclusive REDLINK Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. It also provides full system compatibility with 60+ M18 cordless solutions. Upgrade to the M18 5.0AH REDLITHIUM-ION BATTERY to instantly increase the run-time and durability of your M18 cordless tools.

• REDLINK intelligence, provides optimised performance and over load protection
• Best in class construction, offers long lasting performance and durability
• Fuel gauge on board displays remaining run time for less down time on the job
• All weather performance delivers fade free power in extreme jobsite conditions
• 2.5x more run time
• 20% more power than a standard 18V lithium battery
• 2x more life than a standard 18V lithium battery

Specifications:

• Platform: M18
• Charge time:
  • M12-18FC: 60 mins
  • M12-18C: 105 mins

*Charger not included

The M18 &; M12 Rapid Charger charges packs up to 40% faster, reducing downtime and maximising productivity. The charger accepts all M18 and M12 batteries, providing an upgrade for both systems.Featuring REDLINK Intelligence, it communicates directly with the battery to monitor cell voltage, temperature, and charge status to optimise the performance and extend the life of the pack. As an added level of communication, the charger indicates when the battery reaches an 80% charge, providing confidence that a substantial amount of work can be completed without waiting for a full charge.

• Charges batteries up to 40% faster.
• Charges all M12 and M18 batteries.
• Sequential charging: automatically charges the second inserted pack once the first pack is fully charged.
• REDLINK Intelligence: charger communicates with the battery pack to ensure optimum performance and extend life
• M18 REDLITHIUM-ION 2.0 Ah / 4.0 Ah / 5.0 Ah / 6.0 Ah / 9.0 Ah battery packs recharge in 26 min / 47 min / 59 min / 68 min/ 95 min or less
• M12 REDLITHIUM-ION 2.0 Ah / 3.0 Ah / 4.0 Ah / 6.0 Ah battery packs recharge in 28 min / 45 min / 57 min / 90 min or less

Specifications:

• Platform: M12
• Charge Time:
  • 2.0Ah: 26 minutes
  • 4.0Ah: 47 minutes
  • 5.0Ah: 59 minutes
  • 6.0Ah: 75 minutes
  • 9.0Ah: 90 minutes

*Battery not included

Specifications

Pickup In Store

If you don't want to pay for delivery or need to ASAP, you can pick it up in store. Just bear in mind not all stores will have everything in stock. You'll be able to see if they do during the checkout process.

Free Delivery

Large and heavy items are excluded from free shipping, along with items under $99. Remote areas are excluded from free shipping, you will be contacted prior to delivery to confirm shipping charges if necessary.

Delivery Timeframe

We despatch the majority of orders within 1-2 working days. Delivery times vary based on your location (if you're in the sticks, it's gonna take longer!) but most orders will be delivered within the time frames below:

• Metro (Excludes Hobart Metro) 1-2 days
• Regional Areas 3-4 days
• Hobart Metro 3-4 days
• Remote Areas 6-9 days

Returns

Changed your mind No worries. You just need to get the product back to the store it was shipped from (this is on your receipt) within 30 days, unused and in its original packaging and we'll give you a refund (excluding delivery costs). You can read our full returns &; exchanges policy here (special order items are excluded from this returns policy).

Videos

Milwaukee M18 FUEL w/ONE-KEY High Torque Impact Wrenches