Panasonic VL-SWD272 Wireless Video Intercom System DECT wireless 7" wide screen display Voice changer Night vision Picture recording

Panasonic VL-SWD272AZ video intercom system consists of 7-inch wide colour / WVGA (800 x 480 pixels) monitor, 2.2-inch wide colour / QVGA (320x240 pixels) DECT wireless handset and door station.

• Highly Expandable: up to 6 x 2.2 inch wide screen wireless handsets and 3 x 7-inch screen monitors. In addition, PBX connectivity is also supported
• Wireless handset with 2.2-inch screen works within the range of 100m from the main monitor and allows to respond to incoming call from the door/gate wherever you are
• 7-inch Screen: the main monitor and extension monitor have a 7-inch wide screen that offers easy viewing of wide vertical and horizontal views. Horizontally - approx. 87, vertically - approx. 66
• Voice Change Function: this function makes woman's voice (higher keys) sounds like a man's (lower keys)
• Electric Lock Release support for gate: the gate or door lock can be easily and quickly released using monitors or wireless handsets
• Picture Recording Function: the main monitor and extension monitor can record images from up to 50 calls or monitoring sessions. (up to 8 still images per visitor/ session)
• Night Vision with LED lights (illumination lamp): door station is equipped with LED lights (illumination lamp). It enables the colour display of visitors at a distance of about 50 cm at night.

Optional AccessoriesWireless MonitorVL-WD613 (1 included with VL-SWD272)Door StationVL-V522L (1 included with VL-SWD272)MonitorVL-MD613 (1 included with VL-SWD272)Maximum Connectable UnitsWireless MonitorUP to 6 (1 included with VL-SWD501)Wireless Monitor*A total of up to 6 wireless sub monitors and extension monitors can be registered.Door StationUP to 2 (1 included with VL-SWD272)MonitorUP to 3 (not including main monitor)Monitor*A total of up to 6 wireless sub monitors and extension monitors can be registered.Connectable DevicesElectric Lock Release SupportUP to 2 (user supplied)PBXOnly Panasonic PBXConveniencePicture RecordingInternal memory: Up to 50 visitors/sessions (up to 8 still images per visitor/session)Night VisionYes (Warm white LED lights, Infrared LEDs)Touch Panel / Pan &; Tilt

• / YesVoice ChangerYes (only from the main monitor)Intercom callIntercom Call (between main monitor, sub monitor and extension monitor)MonitorPower source100 - 240 V AC, 50/60 HzPower consumptionStandby : approx. 2.5WPower consumptionDuring operation : approx. 10WDimensions (H x W x D)Approx. 158 x 243 x 29.5 (mm)Mass (weight)Approx.825g (including mounting bracket &; AC cable)Mass (weight)

• The weight of the AC cable differs depending on the region.Operating environmentAmbient temperature : 0 to + 40 , Up to 90 % RH (Relative Humidity) non condensingDisplay size7-inch, wide color / WVGA (800 x 480 pixcels)Display languageEnglish, ArabicTalking methodHands-freeInstallation methodWall mount (mounting bracket supplied)Frequency range1.88 GHz to 1.90 GHzExternal materialABSDoor StationPower sourceSupplied by the Main Monitor StationDimensions (H x W x D)Approx. 131 x 99 x 36.5 (mm) *Excluding protruding sectionsMass (weight)Approx. 200 gOperating environmentAmbient temperature: Approx. -15 C to +55 C, Up to 90 % RH (Relative Humidity) non condensingOperating environment(tested up to -20 C)Viewing angleHorizontally: Approx. 87 degree, Vertically: Approx. 66 degreeInstallation methodSurface mount (mounting base supplied)Image sensor/ Camera (pixel)CMOS sensor (Approx. 0.3M pixels)Minimum illuminance required1 lx (within approx. 50 cm from the camera lens)Lighting methodWarm white LED lights, Infrared LEDsIP rating (INGRESS PROTECTION)IPX3 *Water resistance is only assured if the doorphone is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken.External materialFlame retardant PC+ABS resin, Flame retardant ABS resinWireless MonitorPower sourceRechargeable Ni-MH (AAA x 2)Dimensions (H x W x D)Approx. 173 x 52 x 30 (mm) *Excluding protruding sectionsMass (weight)Approx. 160 g (including the batteries)Operating environmentAmbient temperature: 0 C to +40 C, Up to 90 % RH (Relative Humidity) non condensingDisplay2.2-inch colour / QVGA (320 x 240 pixels)Frequency1.88 GHz to 1.90 GHzExternal materialABS resinOperating timeStandby use: approx. 80 hours *When used fully charged in an operating temperature of 20 C.Charging timeApprox. 8 hours *When the operating temperature is 20 C. The charging time may increase when the operating temperature is lower than this.Transmitting rangeApprox. 100 m (line-of-sight distance from the main monitor)ChargerPower sourceAC adaptor (PNLV226)Power sourceInput: 220-240 V AC, 0.1 A, 50/60 Hz, Output: 5.5 V DC, 0.5 APower consumptionStandby: Approx. 0.4 W (when the sub monitor is not placed in the charger)Power consumptionDuring charging: Approx. 1.4 WDimensions (H x W x D)Approx. 43 x 81 x 76 (mm) *Excluding protruding sectionsMass (weight)Approx. 70 g (excluding the AC adaptor)Operating environment0 C to +40 C, Up to 90 % RH (Relative Humidity) non condensingExternal materialABS resin