Ruckus ZoneFlex H510 Multiservice 802.11ac Wave 2 Wired/Wireless Wall Switch. Power Adapter not included.

Overview:

High Performance 802.11ac Wave 2 Integrated Wired/wireless Wall Switch

The ZoneFlex H510 is the industrys first Wave 2 802.11ac wired and wireless wall switch using Ruckus patented BeamFlex+ adaptive antenna technology to deliver high-speed 802.11ac Wi-Fi in an ultra-sleek, low-profile design that can be discretely installed over a standard electrical junction box. Ideal for offering converged services in hotel guest rooms, student residences, and multi-dwelling units, the ZoneFlex H510 provides an easy way to offer multiple connections in a single room without multiple cables.

The ZoneFlex H510 supports Multi-User MIMO (MU-MIMO) as a Wave 2 solution and can increase network throughput by transmitting to two Wave 2 clients at the same instant in time. This efficient utilization of the Wi-Fi channel boosts performance for Wave 2 clients but also frees up airtime for all clients, which means even non-Wave 2 clients see a performance benefit.

The mobile device ready ZoneFlex H510 with BeamFlex+ adapts in real time to client device location and physical orientation, delivering consistent Wi-Fi performance. The BeamFlex+ adaptive antenna system of the ZoneFlex H510 is optimized to deliver best-in-class Wi-Fi coverage and performance in hotel guest rooms and MDU residences.

Equipped with four Ethernet ports for in-room access, the ZoneFlex H510 can be used to connect a range of wired network devices such as IPTV set top boxes, IP telephones, or networked minibars while simultaneously providing dual band 802.11ac wireless LAN coverage. An IEEE 802.3af-compliant Power-over-Ethernet (PoE) port on the H510 allows devices such as IP telephones to be powered directly from the wall switch. The H510 itself may be powered via standard PoE or a DC power adapter.

The ZoneFlex H510 offers maximum flexibility and future-proofed utility. It is designed to securely support future add-on radio modules for wireless connectivity beyond best-in-class Wi-Fi. The cable pathways at the rear, support legacy cabling such as RG6 or CAT3/CAT5. Existing services such as video and voice over Ethernet can co-exist within the same junction box, reducing both installation time and construction costs. The H510 can be deployed as a standalone device or centrally managed by SmartZone, ZoneDirector, or FlexMaster management platforms.

Features:

Integrated BeamFlex+ Smart Antenna Technology

• BeamFlex+ support for up to 4 dB of signal gain and 10 dB of interference mitigation in addition to the antenna gain
• Polarization Diversity with Maximal Ratio Combining (PD-MRC) ensures reliable connectivity for mobile devices

Superior, Fast Wi-Fi Connectivity

• 802.11ac 2X2x2:2 stream dual-band 2.4GHz and 5GHz concurrent connectivity with BeamFlex+
• In-room device provides integrated Wi-Fi AP and Ethernet wall switch for a wide range of devices and applications
• Multiple SSIDs, port-based VLANs support, concurrent IP-based services such as VoIP, IPTV, high-speed Internet access and in-room device connectivity
• Robust authentication options include: 802.1x, MAC-based, LDAP, RADIUS, Active Directory and authentication through an internal user database

Easy to Configure and Deploy

• Can be installed over any standard network wall outlet
• Gigabit Ethernet uplink with PoE input (802.3af/at) for easy deployment without the need for additional power outlets. Reduces the need for power cabling, switch ports and power sourcing equipment
• Powers up PoE+ devices such as IP-based VoIP phones further eliminating power cords that clutter the environment.
• Pass-through feature allows native connectivity for existing digital phones or in room network devices
• Can be deployed in standalone mode or centrally managed by the Ruckus vSCG, SmartZone, ZoneDirector, Ruckus Cloud Wi-Fi or Ruckus FlexMaster systems

Perfect for hotel guest rooms and dormitories

• Sleek, inconspicuous compact form factor for best aesthetics
• Front port access eliminates unsightly cabling and disruptive furniture placement

Other Features

• Integrated dual radio 2x2 802.11ac Wav 2 Wi-Fi AP and Ethernet wall switch supporting Multi-User MIMO (MU-MIMO)
• Ruckus patented BeamFlex+ adaptive antennas optimized for in-room performance and mobile clients
• Matched Band Coverage ensures similar Wi-Fi coverage for both 2.4 and 5 GHz client devices
• Modular options for add-on radios
• Powered by either PoE or 48VDC
• Supplies PoE power for in-room devices such as VoIP phones
• SmartCast QoS
• Multiple BSSIDs per radio with unique QoS and security policies
• WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i
• 802.1X support for RADIUS and Active Directory*
• Dynamic PSK*
• Application recognition and control*
• Mounts over a standard US and EU single gang wall jack
• RJ-45 for uplink Ethernet port
• Cable channel for preserving legacy infrastructure (e.g. PBX phones)
• SmartMesh Networking*

*with management.

Benefits:

Wave 2 MU-MIMO Network performance improved by transmitting to multiple clients at the same instant.

Converged IP Service Multiple SSIDs, port-based VLANs and four Gigabit Ethernet access ports make the ZoneFlex H510 ideal for supporting concurrent IP-based services such as VoIP, IPTV, high-speed Internet access and in-room device connectivity both wired and wireless

Additive Performance With Beamflex+
BeamFlex+ adaptive antennas improve Wi-Fi signal quality by adapting to device location and orientation, which is ideal for better performance on handheld mobile devices

Modular Support
The H510 has been designed to accommodate snap-on modules for a variety of applications including connectivity beyond Wi-Fi

Standalone Or Centrally Managed
The ZoneFlex H510 can be deployed in standalone mode or centrally managed by the Ruckus ZoneDirector, SmartZone, or Ruckus FlexMaster systems

Flexible Deployment Options
The ZoneFlex H510 requires a single cable drop and operates under standard 802.3af PoE, reducing cabling, switch ports and power sourcing equipment

Sleek, Inconspicuous Compact Form Factor For Best Aesthetics
Installs into any standard electrical outlet box creating a low profile, secure design and front port access which eliminates unsightly cabling and disruptive furniture placement

Integrated Poe Support Eliminates More Wires
POE out to power devices such as IP-based VoIP phones eliminates the need for more power cords and clutter

Deployment:

Converged Wired And Wireless Services ZoneFlex H510 Specifications

Physical Characteristics

• Power:
  POE 802.3af/802.3at | 48VDC input
• Physical Size:
  90 mm x 145 mm x 29 mm
• Weight:
  230g (292g with bracket)
• Physical Ports:
  4 10/100/1000 Mbps Base-T 802.3, 802.3u, RJ-45 Ethernet access ports.
  1 10/100/1000 Mpbs Base-T 802.3, 802.3u, 802.3ab, 802.3af (802.3at class 4) PoE input, RJ-45
  USB 2.0
• Mounting Options:
  Electrical wallbox; Standard US and EU single gang wall jack
  Optional bracket for offset &; wall mount
• Environmental Conditions:
  Operating Temperature: 32F (0C) - 104F (40C)
  Operating Humidity: 15% - 95% non-condensing
• Power Draw ; Idle: 6.5 W
  Typical: 7.3 W
  Peak, no PoE out load: 9.2W
  Max load on PoE out:
  • 4W with 802.3af for PoE
  • 12.95W with 802.3at PoE in

RF

• Minimum Rx Sensitivity
  Up to -99dBm
• Beamflex1 Sinr Tx Gain
  2dB
• Beamflex1 Sinr Rx Gain
  3-5dB (PD-MRC)
• Interference Mitigation
  5dB

Performance and Capacity

• Concurrent users: 100
• Voice Calls: ;30
• BSSID: 8 BSSIDs per radio

Multimedia and Quality of Service

• 802.11e/WMM
  Supported
• Software Queues
  Per traffic type (4), per client
• Traffic Classification
  Automatic, heuristics and TOS based or VLAN-defined
• Rate Limiting
  Dynamic, per-user or per-WLAN

Network Architecture

• IP
  IPv4, IPv6, dual-stack
• VLANs
  802.1Q (1 per BSSID or dynamic, per user based on RADIUS)
  Port-based
• 802.1X For Ethernet Ports
  Authenticator
  Supplicant

Management

• Deployment Options
  Standalone (individually managed)
  Managed by ZoneDirector
  Managed by SmartZone
  Managed by FlexMaster
• Configuration
  Web User Interface (HTTP/S)
  CLI (Telnet/SSH), SNMP v1, 2, 3

WI-FI

• Standards
  IEEE 802.11a/b/g/n/ac

• Mimo Configuration
  2 x 2 : 2 SU-MIMO
  2 x 2 : 2 MU-MIMO

• Supported Data Rates
  802.11n/ac: 6.5Mbps 173.4Mbps (20MHz)
  13.5Mbps 400Mbps (40MHz)
  29.3Mbps 867Mbps (80MHz)
  802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
  802.11b: 11, 5.5, 2 and 1 Mbps
  802.11g: 54, 48, 36, 24, 18, 12, 9 and 6 Mbps

• Rf Power Output* (Aggregate)
  2.4 GHz: 18dBm
  5.0 GHz: 22dBm

• Channelization
  20MHz, 40MHz, 80MHz

• Frequency Band
  IEEE 802.11 b/g/n: 2.4 2.484 GHz
  IEEE 802.11a/ac: 5.15 5.25 GHz; 5.25 5.35 GHz;

• Operating Channels
  2.4GHz : 1-13
  5GHz : 36-64, 100-140, 149-165
  Channel availability is country dependent according to ocal regulations

• Wireless Security
  WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i
  Authentication via 802.1X with ZoneDirector, local authentication database, support for RADIUS, LDAP, and Active Directory

Maximum power varies by country
1 BeamFlex gains are statistical system level effects translated to enhanced SINR based on observations over time in real-world conditions with multiple APs and many clients
* Subject to country regulations