Stainless Steel Draught Generator Rotowent Square Base 200mm

DRAUGHT GENERATOR is a chimney fan that is is to be mounted on the top of a chimney (flue or smoke). Its principle is to increase and stabilize chimney draught no matter of what the chimney height, wind speed or other natural conditions are. Draught generator creates underpressure in the chimney duct using a special physical effect - called injection. It is based on creating the stream of airflow in the secondary duct, which creates underpressure in the main chimney duct. Air movement is caused by ventilator which is placed outside the duct. This working mode does not block the chimney duct and does not obstruct the fume extraction as well as allows the device to withstand high temperatures. - Maximal fumes temperature: 400 [ deg C];
- Power: 230[V] / 50 [Hz];
- This solution is reserved in the RP Patent Office;
- Made from stainless steel. Destination:
- when there are wind fluctuations on the chimney duct ending, caused by its bad location;
- when there is an unfavorable terrain configuration, with strong and frequent winds;
- when there is a lack of chimney draught or it is too weak (f.e. when the chimney duct is too short);
- in order to stabilize and improve the chimney draught in a fireplace or boiler.

• Product made on order - please allow about 2 weeks for delivery
• Maximal fumes temperature: 400 [ deg C]; Power: 230[V] / 50 [Hz]; Made from stainless steel;
• Increase and stabilizing chimney draught;
• Air movement is caused by ventilator which is placed outside the duct;
• Draught generator creates underpressure in the chimney duct using injection.