StoneFil 1.75mm Pottery Clay 500 gram

StoneFil

StoneFil is a PLA-based filament which is based on our modified and easy-to-print EasyFil PLA compound and is gravimetrically filled with 50% of powdered stone.

This high "stone filling" has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher material density up to 37% higher than "normal" PLA. StoneFil is an easy-to-print 3D printer filament and printed objects have an extremely matte stone-like finish with unique natural gradient colour linings resulting in an exceptional chromatic spectrum per print. Every StoneFil printed object will have its own identity and unique gradient colour shading.

Unique features

• Easy-to-print
• 50% gravimetric powdered stone filling
  • o37% heavier than "normal" PLA
• Matte and rough stone-like finish
• Unique natural/organic gradient colour linings
  • oEvery print has its unique natural stone gradient colour shading

General printing guidelines *

Nozzle size: 0.4mm

Layer height: 0.12mm

Flow rate: 110%

Print temp: 200 - 240o C

Print speed: High / Medium

Retraction: Yes - 5mm

Heat bed: 0 - 60o C

Fan speed: 50-100%

Experience level: Beginner

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Abrasiveness

StoneFil has a very high filling with stone powders and therefore the filament can have a slightly more abrasive effect on brass nozzles than unfilled filaments.

Filament length

:1.70 g/cc

50 gr coil

0.5 Kg spool

O 1.75mm

12.2m

122m

O 2.85mm

4.6m

46m