TheVISION Z-Wave Siren and Strobe DCis a wireless device capable of producing an audible and visual alarm.

• Blue LED flashing strobe light
• Loud (105dB @ 1m) audible alarm
• Low battery and tamper indicators
• Includes a 15V DC power supply
• Configurable with Z-Wave certified gateways

TheVISION Z-Wave Siren and Strobe DC is a wireless device, fully programmable with Z-Wave gateways, capable of producing an audible and visual alarm based on your Z-Wave network settings.

This device is designed to operate alongside a Z-Wave enabled sensor which can detect a threat to your household. We recommend selecting any of the sensors below to suit your current needs:

• DHS Z-Wave Multi-Sensor
• VISION Z-Wave Door/Window Multi Sensor
• VISION Z-Wave Shock Sensor
• FIBARO Z-Wave Flood Sensor
• FIBARO Z-Wave Multi-Sensor

Alternatively you can use it with theFIBARO Z-Wave Buttonas a convenient and easily accessible panic alarm in your home or office.

TheVISION Z-Wave Siren and Strobe DCalso includes a battery status indicator which will notify you when its battery level is low and a tamper alarm which will alert the associated Z-Wave gateway if anyone attempts to tamper with this device.

This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:

• Vera Edge
• Vera Plus
• Fibaro Home Center 2/Lite
• Homeseer HS3
• REMOTEC Z-Wave Universal Remote Controller
• RaZberry Pi

**Note:**This device does not include a 15V DC power supply.

Product Support

Manuals:

VISION Z-Wave Siren and Strobe User Manual (Size: 260 kB)

Configuration Command Class:

Parameter 0: Siren/ Strobe Mode, 1 Byte
Value: 0=Siren and Strobe enabled (default), 1=Siren only, 2= Strobe only.
Parameter 1: Alarm auto stop time command, 1Byte
Value: 0=30 seconds (default), 1= 60 secs, 2= 120 secs, 3= Siren will not stop automatically.

Technical Specifications

RF Protocol

Z Wave, Z-Wave Plus certification

RF Frequency

921.42Mhz AU/NZ approved RF for Z Wave

Z Wave device type

Z-Wave binary switch

Internal Alarms

Tamper, Low Battery

Operating Voltage

9~24V DC / 6V Ni-MH CELL 150mAh (included)

Connection Type

wires

Operation Range

Up to 30m indoor with no obstacles

Application

Indoor use only

Operation temperature

-5oC ~ 55oC

Loud Audiable Alarm

105dB @ 1meter

Weight

290g

Housing

ABS

Dimensions

(H x W x D) 116mm x 77mm x 40mm Compliance

RCM, CE