Features of DEQ-S1000A

The output of factory fitted stereo is tuned to match the factory fitted speakers, therefore even when the speakers are replaced, the sound from the higher quality speakers will still be limited. Pioneer sound processor can cancel the factory audio tuning and create an altogether new sound stage that's best suitable to the new speakers and car interior.

Easy Set Up Via Smartphone

Controls of the processor can be done through Pioneer's app called Sound Tune. The app is quiet easy to understand and user. For the factory fitted units that donot support music playback from smartphone, the processor can play music too with USB connection. The app is available for both Android and iPhone

Go for Higher-Grade Circuits and Parts

This universal sound processor incorporates Pioneer's full-custom high-performance 48-bit dual-core DSP for high-quality sound reproduction. An internal clock and pattern are optimally tuned. Sound degradation from jitter noise is thoroughly eliminated.

Easy to Install

Pioneer sound processor offers an easy plug &; play connection. The specially developed wire harness connects the factory fitted system with the processor without any hassles. This Wire harness derives Power and audio signal for the processor. The Audio signal can then be tuned as per the user's preference with an interactive smartphone app.

Compact Size

The extremely compact size of the processor makes the installation easy and neat. The processor can fit in the glove box, under the front passenger seat or behind the factory fitted stereo if there is a space.

How to use

Download the Sound Tune App in your smartphone and then connect the phone with processor to do the settings.
HOW TO CONNECT
For using Source Calibration feature, a test signal is required. Please download it from this link. Test signal is available in two formats (mp3 &; wav)TEST SIGNAL FOR CALIBRATION

Connection Patterns

There are specific connection patterns that can be used for powering different speakers and subwoofers.

Speaker Settings

Standard Mode- Front/Rear (HPF)- Frequency: 50Hz, 63Hz, 80Hz, 100Hz, 125Hz, 160Hz, 200Hz

Standart Mode- Sub woofer (LPF)- Frequency: 50Hz, 63Hz, 80Hz, 100Hz, 125Hz, 160Hz, 200Hz

Standart Mode- Sub woofer (LPF)- Gain: -24 - +10dB (1dB/Step)

Standart Mode- Sub woofer (LPF)- Phase: Normal/Reverse

Standard Mode- Speaker level: -24 - +10dB (1dB/Step)

Standard Mode- Time Alignment: 0cm - 350cm (2.5 cm/step)

Network Mode- High (HPF)- Frequency: 1.25kHz, 1.6kHz, 2kHz, 2.5kHz, 3.15kHz, 4kHz, 5kHz, 6.3kHz, 8kHz, 10kHz, 12.5kHz

Network Mode- Mid (LPF)- Frequency: 1.25kHz, 1.6kHz, 2kHz, 2.5kHz, 3.15kHz, 4kHz, 5kHz, 6.3kHz, 8kHz, 10kHz, 12.5kHz

Network Mode- Sub woofer (LPF)- Frequency: 25Hz, 31.5Hz, 40Hz, 50Hz, 63Hz, 80Hz, 100Hz, 125Hz, 160Hz, 200Hz, 250Hz

Network Mode- Sub woofer (LPF)- Slope: 0dB(Pass), -12dB/oct, -18dB/oct, -24dB/oct, -30dB/oct, -36dB/oct

Network Mode- Speaker level: -24 - +10dB (1dB/Step)

Network Mode- Time Alignment: 0cm - 350cm (2.5 cm/step)

Audio Specs

Max power: 50W x 4 (50Wx2ch/4Ohm + 70Wx1ch/2Ohm for SUB-WOOFER)

Continuos power: 22W x 4 (50Hz to 15kHz, 5%THD, 4Ohm LOAD, Both Channels Driven)

Load impedence: 4Ohm (4 - 8Ohm(2Ohm for 1ch) allowable)

Preout Output Level (Max): 4.0V

Preout Impedence: 250Ohm

Preout Frequency response: 10Hz to 20kHz (+0dB , -1dB)

Preout S/N Ratio: 105 dB

Preout THD: 0.01%

Equalizer (13Band Graphic Equalizer) frequency: 50Hz, 80Hz, 125Hz, 200Hz, 315Hz, 500Hz, 800Hz, 1.25kHz, 2kHz, 3.15kHz, 5kHz, 8kHz, 12.5kHz 12dB(0.1dB step)